How to Sew: Hourglass Quilt Blocks Two at a Time
Follow this step-by-step guide to learn how to make Hourglass quilt block units, two at a time. Further down the page you’ll also find a useful demonstration video where you can watch this technique in action!
So, what are Hourglass quilt blocks?
Hourglass units are one of the basic quilt blocks that you will see frequently either on their own, or combined with other blocks to make other designs.
Hourglass quilt blocks are a variation of the Quarter Square Triangle (QST) design. Both are a square block that is split on both diagonals to create four equal triangles. The difference with an Hourglass block is that only two colours are used, rather than three or four.
Whilst Hourglass blocks can be made by sewing together four individual triangles, the method in this step-by-step guide shows you how to create two identical units at the same time by making two sets of Half Square Triangles (HSTs) first.

This method makes slightly oversized HSTs which means that the Hourglass blocks will need to be trimmed to the right size once piecing is complete.
GET the Step-by-Step Guide - How to Sew Hourglass Quilt Blocks
Before you get started, if you would like a handy print out of this step-by-step guide PLUS some layout suggestions to get your creativity flowing, then sign up for the newsletter below and a link to this handy pdf will be sent directly to your inbox.

READ How to Make Hourglass Quilt Blocks
Follow this super quick Step-by-Step Guide as to how to make Hourglass quilt block units, two at a time. If you’d rather skip to the video, just scroll further down the page!
The step-by-step guide below shows the making of 2½” finished Hourglass blocks in pink and yellow. Two blocks are made at the same time.

Step 1 – Prepare Fabrics (optional)
When making Hourglass quilt blocks this way you will be sewing, pressing and trimming on the bias (i.e. diagonally across the straight grain) of the fabric. This means that there are several opportunities for the fabric to stretch and distort out of shape. In order to reduce this possibility of this happening, before cutting out, you can treat your fabrics with a spray of starch or starch alternative such as home-made sizing or something like Best Press or standard laundry starch spray.
Preparing your fabrics will give them a bit more body and stability. It will also help to reduce fraying and it’s likely to help you with cutting accuracy.
Step 2 – Cut Fabrics
To make Hourglass quilt block units you will need to start with two identically sized squares in two different fabrics.
Starting Squares = Finished Size + 1 ½”
If you can’t be bothered with the quilt math or don’t want to have to come back to this page to remember the formula, just get the step-by-step guide by filling out the box above.
Step 3 – Mark Stitching Guide
On the reverse of one square draw a line with a fabric marking pen that runs diagonally from point to point.
It doesn’t matter which square you mark up, but more often than not, the drawn line will show up better on the lighter of the two fabrics.

Step 4 – Pair the Squares and Pin
Place the two squares Right Sides Together (RST), with the wrong side of the marked square facing uppermost (so that you can see it).
Pin together if desired. If using pins, keep them clear of the stitching area.

Step 5 – Sew
Sew ¼” either side of the drawn line, removing any pins as you go.
Make sure you are sewing with an accurate ¼” seam allowance.

Step 6 – Cut in Half
Cut along the drawn line, between the two rows of stitching.
You can use a pair of scissors or a rotary cutter.

Step 7 – Press
Set your seams by pressing over the top of the stitching lines.
Peel back the upper layer and press seam allowances to one side (usually the darker fabric). It is important that the seams are pressed in the same direction on both of the HSTs.

Step 8 – Mark Stitching Guide on One HST
On the reverse of one HST draw a line with a fabric marking pen that runs diagonally from point to point, perpendicular to the stitching line.

Step 9 – Pair the HSTs and Pin
Place the HSTs RST so that the fabrics are opposite each other.
As the seams were pressed in the same direction (in step 7) you will be able to nest the seams against each other so that the seam allowances are going in opposite directions.
Pin together if desired. If using pins, keep them clear of the stitching area.

Step 10 – Sew
Sew ¼” either side of the drawn line, removing any pins as you go.
Make sure you are sewing with an accurate ¼” seam allowance.

Step 11 – Cut in Half
Cut along the drawn line, between the two rows of stitching.
You can use a pair of scissors or a rotary cutter.

Step 12 – Press
Set your seams by pressing over the top of the stitching line.
Peel back the upper layer and press seam allowances to finish the block. Seam allowances can be pressed to one side, pressed open or the seam allowances can be twirled.
Press Seam Allowances to One Side:
right side

wrong side

Press Seam Allowances Open:
right side

wrong side

Twirl Seam Allowances:
right side

wrong side

By the way…if you have never twirled a seam allowance on a block then check out this great video. It uses a 4-patch block as an example, but the process is exactly the same!
Step 13 – Trim the First Two Sides
Square up the Hourglass block by trimming it to the correct unfinished size.
Place a ruler on top of the block, lining up the 45° line with the diagonal line on the block. Check the measurements on the ruler both horizontally and vertically to make sure that the fabric exceeds/goes further than the trimming size measurements. Also ensure that the centre point of the block is the correct distance from the upper and right hand edges of the quilting ruler.
Use the formula below to determine the centre point:
Centre Point for Trimming = Unfinished Size ÷ 2
Trim away the excess on the right hand side and along the top edge of the block.
The example below shows a 2½” finished Hourglass block (with seams pressed open) being trimmed to 3”. The centre point is 1½” from the outer edges of the ruler.


Step 14 – Trim the Second Two Sides
Rotate the block 180° to trim the two remaining sides. The edges trimmed in the previous step should sit perfectly under the vertical and horizonal lines of the ruler, matching the unfinished block measurements. The 45° line on the ruler should sit on top of the seam line and the centre point should be half of the unfinished block size.


WATCH How to Sew Hourglass Quilt Blocks
Watch the video demo and LEARN HOW TO SEW Hourglass Quilt Blocks. This in-depth video shows you just how easy it is to make these super versatile quilt blocks!



Hello Victoria
I have tried a few times to send me request for the “How to Sew Hourglass Quilt Blocks Guide” but the Captcha site isn’t working and so my request does not get sent to you, Try again later, and even then it’s not working.
Could you please email me the “How to Sew Hourglass Quilt Blocks Guide”?
Thank you
Kat W